You can ORDER SAFELY and
SECURELY online using:
More search options
A rugged wind sensor with digital display, designed for vehicle mounting. Registers wind speeds up to and over 125 mph. Powered by a coin battery for about 1 year of typical (intermittent) use. The anemometer's magnetic mounting kit consists of 2 heavy-duty magnets on an aluminum bracket. Total rated pull strength of the magnets is over 110 lbs. Tested in winds over 115 mph!
Mount the Vortex Storm Chaser™ wind sensor firmly on your stormchaser vehicle, run the wire into someplace safe, dry, and warm, stick the display where you can easily see it, and you can get a wind measurement without getting wet or pelted by hail or flying debris. The Storm Chaser is fully portable, and comes with 25 feet of wire and a male/female jack connection so you can leave the wind speed sensor installed and remove the display when not in use.
Important Note About Average Wind Speed:
* WORKAROUND: if you want to know the real average wind speed - even with spells near zero, do the following: reset the computer, note the time. When desired, simply divide the total number of wind "miles" on the display by the number of hours since reset.
If you're having troubles with this device, contact support at 530-899-8434, or send an e-mail to firstname.lastname@example.org.
Vortex Anemometer Display Kit Rotor (Cups) & Shaft Kit Wind Sensor Repair Kit